Rock wool Paroc Solid 50mm

Compare

Rock wool Paroc Solid 50mm

PAROC Solid is a general-purpose stone wool slab for thermal, sound and fire insulation of attics and floors.
It is soft and flexible, making it easy to install and cut. The board will not settle, crack or lose its insulating properties over its lifetime.
Thanks to its density, it does not lead to air convection inside it, so the thermal resistance remains the same.
Lambda - 0.037 W/mK

2-4 weeks

Thermal conductivity λD	0,037 W/mK
Density ϱ	*NPD
Fire classification	A1
Compressive stress at 10% deformation	*NPD
Tensile strength perpendicular to faces	*NPD
Point load	*NPD
Available thickness (mm)	50, 70, 100, 150, 200
Additional information	–

Loft Mineral wool for thermal insulation and insulation in usable and non-usable attics and lofts: above the rafters, between the rafters, under the rafters as well as suspended ceilings and knee walls (so-called dry construction).
Partition Walls Mineral wool for insulation and insulation of walls from the inside, construction of partition walls, pre-walls, partition walls and industrial pre-walls.
Frame constructions, ceilings, floors on joists Mineral wool for insulation and insulation of: floors on a grid, industrial ceilings, ventilated flat roofs, floors on joists on a wooden or steel structure, suspended ceilings, external and internal walls of frame houses and wooden houses.
Ventilated facades Mineral wool for thermal insulation and insulation of external walls using the light dry method with panel covering, external walls with a stone or glass facade, skeletal external and internal walls.

Thickness [mm]	Lenght [mm]	Width [mm]	Amount/Pack [pcs.] / [m2]	Packs per pallet [pcs.] / [m2]	R [m2 × K/W]
50	1 220	610	14 / 10,42	24 / 250,08	1,35
70	1 220	610	10 / 7,44	24 / 178,56	1,85
100	1 220	610	8 / 5,95	24 / 142,80	2,70
150	1 220	610	5 / 3,72	24 / 89,28	4,05
200	1 220	610	4 / 2,98	24 / 71,52	5,40